LADDER HOOKS

Newly redesigned Reimann Georger Ladder Hook with rolling wheel (an inch of length has been added to the lower hook). This heavy-duty ladder hook has a swivel angle iron end as well as a non-swivel rolling wheel. Use one hook per ladder. 4.7 pounds, 20 1/2 inches long overall, 6 inch swiveling plate at tip of hook. Assembly required. Made in the USA.

Secure  almost any single ladder section to your roof. The ladder hook is especially helpful when working with weak decking, wet or icy surfaces, steep slopes, and chimney or antenna repairs. The wheel makes it easy  to roll on the roof. The swiveling end plate distributes the weight of  the ladder to prevent breakage of slates, tiles, or asbestos shingles.

Ridge Hook for Ladders, With Fixed Wheel & Swivel Bar: This heavy-duty ladder hook has a rod-reinforced hook as well as a rolling wheel. Use one hook per ladder. Hook end plate swivels, so it's the perfect ladder hook for slate roofs! 300 pound capacity. Made in the USA.

It’s  adjustable lock works to secure almost any ladder to your roof. The ladder hook is especially helpful when working with weak decking, wet or  icy surfaces, steep slopes, and chimney or antenna repairs. The reinforced rod around the hook adds strength and durability, while the  caster makes it easy to roll on the roof. The 8 inch wide swiveling end plate distributes the weight of the ladder to prevent breakage of slates, tiles, or asbestos roofing shingles. 

Easily  rolls up and down roof surface on the wheel. When the ladder hook reaches the top of the roof, flip the ladder to hook it over the ridge. Essential for working on roofs safely. Easy on/off ladder: the hook clamps onto the ladder rungs. You can work on slate, tile, or asbestos  roofs without damaging them! The rolling wheel does not swivel (it will  only roll up or down the roof, not sideways) and is therefore safe.

Always install a  ladder hook only on a single section of ladder (NEVER ON AN EXTENSION  LADDER).

- Recently Modified: greater reinforcement (no more bending)

- Folds Flat

- Individually Boxed

This ACRO Professional Hook Ladder Complete Set includes an ACRO ladder hook(#11610), and four six-foot ladder sections(#11601). The six-foot long ladder sections bolt together. Take apart and throw this in the back of your truck. No ladder rack needed! Roll up roof on ladder hook wheel, then flip over to hook it! Makes working on steep slopes faster and safer. Creates hook ladder up to 24 feet long! An Optional Padding Kit is available (call us).

•  Raised Solid Steel Rungs are Hand Welded
•  10 inch Hook has ½ inch Reinforcement Rod
•  Wheel on Hook to Roll-Up Roof without Damage   
•  Ideal for Staging Material & Quick On and Off Work
•  Made in USA   
•  Shipping weight approx. 70 pounds
•  Ships via UPS ($100.00 average shipping cost)

Two six-foot long ladder sections that can be bolted together. Take apart and throw this in the back of your truck. No ladder rack needed! Makes Working on Steep Slopes Faster & Safer. You will need the hook end, or buy the complete set.

Creates hook ladder up to 24 feet long! An optional Padding Kit is also available (call us).

•   Raised Solid Steel Rungs are Hand Welded
•   Optional 10 inch Hook has ½ inch Reinforcement Rod
•   Wheel on Optional Hook Rolls Up Roof without Damage
•   Ideal for Staging Material & Quick On and Off Work

Hook End Only for ACRO Hook Ladder

Attaches to ACRO Hook Ladder Sections.

Or buy the complete set.

•   10 inch Hook has ½ inch Reinforcement Rod
•   Wheel on Hook to Roll-Up Roof without Damage
•   Ideal for Staging Material & Quick On and Off Work
•   Made in USA

Creates rolling hook ladder up to 24 feet long when attached to ladder sections. Six foot long ladder sections bolt together. Take apart and throw the ladder in the back of your truck. No ladder rack needed! Roll up roof on ladder hook wheel, then flip over to hook it! Makes working on steep slopes faster and safer.