Stainless Roof Nails
We sell stainless steel roofing nails, smooth shank and ring shank, gasketed and not gasketed, for roofing, flashing, or any type of construction work. For a full list of our bulk purchase copper roofing nails, click here.
1.5 inch or 2.5 inch (select below). Made in the USA.
10 gauge, #304, non-passivated
A good nail for installing standard thickness slate roof shingles. Will last forever.
3/8 inch head. About 145 nails/pound if 1.5 inch and 98/pound if 2.5 inch.
Traditional smooth shank, one pound lots.
Use 1.5 inch nails with standard thickness roofing slates and 2.5 inch for very heavy slates.
1.5 inches long. This is the nail you need for installing standard thickness slates! Recommended for installing new roof slate especially on old roof decks that are too hard for copper nails (such as oak or yellow pine), or whenever you want a nail that will last forever. Made in the USA.
25 pound boxes of 2 inch, 2.5 inch or 3 inch (select length below), 10 gauge, #304 stainless roofing nails, 3/8 inch head diameter. About 105 nails/pound if 2 inch, 91/pound if 2.5 inch, and 78/pound if 3 inch.
You can use these nail for anything, not just roofing. Wherever you use them, you can be sure that they will last virtually forever!
2.5 inch, by the pound. Perfect for nailing ridge straps and flashing cleats, among other things.
10 gauge, # 304 stainless, 3/8 inch diameter head, about 91 nails/pound. Made in the USA.
2 inch, 2.5 inch, or 3 inch (select length below), 10 gauge, 304 stainless, 3/8 inch head diameter.2 inch 105/pound2.5 inch 91/pound3 inch 78/poundYou can use these for anything, not just roofing. Where ever you use them, you can be sure that they will last virtually forever! Made in the USA.
2.5 inches long. A good nail for installing ridge metal or anywhere an exposed nail head is needed. Will last forever. 10 gauge (.134 inch), #304, non-passivated, 3/8 inch diameter head - About 91/pound. Recommended for installing metal ridges or anywhere exposed nail heads are required. Made in the USA.
Stainless Gasketed Ring Shank Roofing Nails in 25 pound cases
1.5, 2.0 or 2.5 inch (select length below), for when you need a longer gasketed nail for nailing metal ridges, etc. Made in the USA.
10 gauge, 304 stainless, ring shank
1.5 inch nails have about 113 nails/pound, 2 inch 98/pound, and 2.5 inch 83/pound.