FALL PROTECTION

We sell fall protection safety equipment and devices such as ladder hooks, roof edge safety rails, and the FallTech 8595A Professional Fall Protection Kit. We will be adding additional equipment soon, so check back!


Items: 17 of 7, per page
Drop items here to shop
Product has been added to your cart
  • Acro Model 11084 Ladder Hook
    • 23% less
    Drag and drop me to the cart

    Ridge Hook for Ladders, With Fixed Wheel & Swivel Bar: This heavy-duty ladder hook has a rod-reinforced hook as well as a rolling wheel. Use one hook per ladder. Hook end plate swivels, so it's the perfect ladder hook for slate roofs! 300 pound capacity. Made in the USA.

    It’s  adjustable lock works to secure almost any ladder to your roof. The ladder hook is especially helpful when working with weak decking, wet or  icy surfaces, steep slopes, and chimney or antenna repairs. The reinforced rod around the hook adds strength and durability, while the  caster makes it easy to roll on the roof. The 8 inch wide swiveling end plate distributes the weight of the ladder to prevent breakage of slates, tiles, or asbestos roofing shingles. 

    Easily  rolls up and down roof surface on the wheel. When the ladder hook reaches the top of the roof, flip the ladder to hook it over the ridge. Essential for working on roofs safely. Easy on/off ladder: the hook clamps onto the ladder rungs. You can work on slate, tile, or asbestos  roofs without damaging them! The rolling wheel does not swivel (it will  only roll up or down the roof, not sideways) and is therefore safe.

    Always install a  ladder hook only on a single section of ladder (NEVER ON AN EXTENSION  LADDER).

    Recently Modified: greater reinforcement (no more bending)

    - Folds Flat

    - Individually Boxed

    • $49.00

    Not rated yet
  • Drag and drop me to the cart

    Newly redesigned Reimann Georger Ladder Hook with rolling wheel (an inch of length has been added to the lower hook). This heavy-duty ladder hook has a swivel angle iron end as well as a non-swivel rolling wheel. Use one hook per ladder. 4.7 pounds, 20 1/2 inches long overall, 6 inch swiveling plate at tip of hook. Assembly required. Made in the USA.

    Secure  almost any single ladder section to your roof. The ladder hook is especially helpful when working with weak decking, wet or icy surfaces, steep slopes, and chimney or antenna repairs. The wheel makes it easy  to roll on the roof. The swiveling end plate distributes the weight of  the ladder to prevent breakage of slates, tiles, or asbestos shingles.

    Buy this tool in a set and get free shipping and a free Slate Roof Bible 3rd Edition: 5-piece set, 6-piece set.

    • $40.00

    Not rated yet
  • Acro Professional Hook Ladder
    • 26% less
    Drag and drop me to the cart

    This ACRO Professional Hook Ladder Complete Set includes an ACRO ladder hook(#11610), and four six-foot ladder sections(#11601). The six-foot long ladder sections bolt together. Take apart and throw this in the back of your truck. No ladder rack needed! Roll up roof on ladder hook wheel, then flip over to hook it! Makes working on steep slopes faster and safer. Creates hook ladder up to 24 feet long! An Optional Padding Kit is available (call us).

    •  Raised Solid Steel Rungs are Hand Welded
    •  10 inch Hook has ½ inch Reinforcement Rod
    •  Wheel on Hook to Roll-Up Roof without Damage   
    •  Ideal for Staging Material & Quick On and Off Work
    •  Made in USA   
    •  Shipping weight approx. 70 pounds
    •  Ships via UPS ($100.00 average shipping cost)
    • $476.00

    Not rated yet
  • Pair of ACRO Hook Ladder Sections
    • 25% less
    Drag and drop me to the cart

    Two six-foot long ladder sections that can be bolted together. Take apart and throw this in the back of your truck. No ladder rack needed! Makes Working on Steep Slopes Faster & Safer. You will need the hook end, or buy the complete set.

    Creates hook ladder up to 24 feet long! An optional Padding Kit is also available (call us).

    •   Raised Solid Steel Rungs are Hand Welded
    •   Optional 10 inch Hook has ½ inch Reinforcement Rod
    •   Wheel on Optional Hook Rolls Up Roof without Damage
    •   Ideal for Staging Material & Quick On and Off Work
    • $210.00

    Not rated yet
  • Acro Hook Ladder Set (Hook End Only)
    • 30% less
    Drag and drop me to the cart

    Hook End Only for ACRO Hook Ladder

    Attaches to ACRO Hook Ladder Sections.

    Or buy the complete set.

    •   10 inch Hook has ½ inch Reinforcement Rod
    •   Wheel on Hook to Roll-Up Roof without Damage
    •   Ideal for Staging Material & Quick On and Off Work
    •   Made in USA

    Creates rolling hook ladder up to 24 feet long when attached to ladder sections. Six foot long ladder sections bolt together. Take apart and throw the ladder in the back of your truck. No ladder rack needed! Roll up roof on ladder hook wheel, then flip over to hook it! Makes working on steep slopes faster and safer.

    • $56.00

    Not rated yet
  • Rake Edge Safety Rail Brackets
    • 26% less
    Drag and drop me to the cart

    #12075 Rake Edge Safety Rail Bracket: Works With #12070 Steep Pitch Guardrail System to Form Complete Residential Protection. LUMBER NOT INCLUDED!

    Open Edge Guardrail System Bracket & Post #12075. 

    You are buying a box of 6.

    • Roof bracket with guardrail holder
    • Brackets with interchangeable post
    • Provides fall protection, slide-guard and toeboard
    • Installs and removes like roof brackets
    • Interleaves with shingles
    • Works on any pitch up to 16/12
    • Tested in a lab to meet OSHA’s 2011 regulations
    • Maximum spacing 8 feet apart (used with construction grade lumber)
    • Can be used in all phases of construction
    • Lumber not Included
    • You are buying a box of six

    TWO Brackets; One Solution (#12070 for Eaves & #12075 for Rake)

    DOWNLOAD THE SPEC SHEET

    DOWNLOAD INSTALLATION INSTRUCTIONS

    • $529.00

    Not rated yet
  • Drag and drop me to the cart

    ACRO 12070 Steep Slope Safety Rail Brackets Box of Six

    Works With Open Edge Guardrail System to Form Complete Residential Protection

    Steep Pitch Guardrail System Bracket & Post #12070 (Lumber Not Included)

    • Roof bracket with guardrail holder
    • Brackets with interchangeable post
    • Provides fall protection, slide-guard and toeboard
    • Installs and removes like roof brackets
    • Interleaves with shingles
    • Positions for various roof pitches from 4/12 to 16/12
    • Tested in a lab to meet OSHA’s 2011 regulations
    • Maximum spacing 8 feet apart (used with construction grade lumber)
    • Can be used in all phases of construction
    • Lumber not included
    • You are buying a box of 6 guardrail brackets


    DOWNLOAD THE SPEC SHEET

    DOWNLOAD INSTALLATION INSTRUCTIONS

    TWO Brackets; One Solution (#12070 for Eaves & #12075 for Rake)


    • $529.00

    Not rated yet