HAND TONGS

We sell professional sheet metal hand tongs and sheet metal seamers for sheet metal and flashing work.

Items: 112 of 14, per page
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    45° bend, lap joint, precoated handles

    Jaw  width: 3 7/8 inch

    Depth of insertion: 2 5/8 inch

    Weight: 2.54 pounds

    Made in Germany.

    • $139.00

    Not rated yet
  • Drag and drop me to the cart

    Freund Clinching Pliers

    90 degree bent

    Precoated handles

    Comes in these three sizes;

    40mm: Jaw Width 1 5/8 inches, Depth of Insertion 2 1/8 inches, Weight 1.32 pounds (01092040)

    60mm: Jaw Width 2 3/8 inches, Depth of Insertion 2 1/4 inches, Weight 1.65 pounds (01092060)

    80mm: Jaw Width 3 1/8 inches, Depth of Insertion 2 5/8 inches, Weight  2.32 pounds (01092080)

    Made in Germany.

     

    • $73.00

    Not rated yet
  • Klenk MA74100 3 Inch Straight Seamer
    • Free
    Drag and drop me to the cart

    8.25 inches long, 3 inches wide, 1.25 inch deep jaw with 1/8 inch gradations, black vinyl grips. Klenk tools have been made in the USA since 1934.

    • $39.75

    Not rated yet
  • Drag and drop me to the cart

    24 inch (61 cm) Folding Tool with 3/8 inch (9.5 mm) and 1 inch (25.4 mm) depths. Extra long folding tool may also be used as a mini-brake by roofing and siding applications. 2.65 pounds.

    • $27.99

    Not rated yet
  • Drag and drop me to the cart

    (SELECT TYPE BELOW - LEGS SOLD SEPARATELY)

    MB48A: The versatile Mini Brake produces bends up to 135 degrees in sheet metals, including aluminum, copper and 22-gauge galvanized steel. The brake's compact size can accommodate sheet metal stock up to 4-feet wide, in any length, because there is no fixed throat depth to contend with. Use the Mini Brake anywhere on the job site, even on a truck tailgate, for a variety of fabricating tasks from large HVAC transitions to narrow roof flashing to structures as small as a 4-inch square. Strengthening ribs on the brake's anvil and apron assure consistent bends. A safety-conscious, cam-over style clamping mechanism, similar to much larger shop-floor brakes, keeps the anvil secure in any position. Optional legs are available separately for an additional $90 (select below).


    MB48B: The MB48B “Pan Style” Mini-Brake is designed to fabricate drip pans and register boxes, as well as complex corners for flashing and fascia, on the job.  At just under 100 pounds (45 kg), it is carried comfortably by two people, or quickly separated into anvil and table components for one-person transport.  The MB48B operates on a workbench, tailgate, or optional legs (add $90, select below) to produce 135° bends in 22-gauge (0.86 mm) galvanized steel at a maximum 48 inch (1.2 m) width.  A 5/16-inch (7.9 mm) plate-steel table apron and anvil frame, with adjustable set-back and strengthening ribs, ensures a uniform bend.  Cam-over-center clamps keep the anvil secure in any position for safe operation.  For making pans and boxes, the full anvil is comprised of 16 movable, plate-steel fingers: Five 2-inch (50.8 mm); Six 3-inch (76.2 mm); and Five 4-inch (101.6 mm) fingers to create a maximum 48-inch (1.2 m) bending width.  Minimum bending width is limited to the 2-inch (50.8 mm) finger width.  Anvil clearance allows a range of flange-height dimensions from 1/2 to 3-inches (12.7-76.2 mm).  No fixed throat depth also makes the MB48B ideal for fabricating large ductwork, flashing and fascia components on the job. 

    • $340.00

    Not rated yet
  • Malco S10 Straight Seamer
    • Free
    Drag and drop me to the cart

    Precision ground jaws with beveled nose produces 135-degree bends. Ideal for precise metal fabricating including HVAC and Metalworking Specialist trade applications.

    The Malco Seamer & Tongs line features generous throat depths and openings to handle a broad range of bending and seaming applications. Durable all-cast-steel construction with heavy-duty pivot point assures long service life. Comfortable vinyl cushioned grips facilitate easier one-hand operation.
     
    S10 – Straight Seamer & Tongs; 1.25 pounds, Throat: 1-1/2 inch (38 mm); Jaw: 3-1/2 inch (89 mm); Tool Length: 9-1/4 inch (235 mm)
    • $59.00

    Not rated yet
  • Malco S11 Offset Seamer
    • Free
    Drag and drop me to the cart

    Versatile, maneuverable offset design is ideal for overhead applications for HVAC and metalworking specialist trades. Precision ground jaws with beveled nose produces 135-degree bends.

    The Malco Seamer & Tongs line features generous throat depths and openings to handle a broad range of bending and seaming applications. Durable all-cast-steel construction with heavy-duty pivot point assures long service life. Comfortable vinyl cushioned grips facilitate easier one-hand operation.
     
    1.25 pounds, Throat: 1-1/2 inch (38 mm); Jaw: 3-1/2 inch (89 mm); Tool Length: 9-1/4 inch (235 mm)
    • $59.00

    Not rated yet
  • Malco S2R Three Inch Hand Seamer
    • Free
    Drag and drop me to the cart

    Malco S2R 3 Inch Hand Seamer and Sheet Metal Tongs. Hand Seamers with Forged Steel Jaws - Malco Redline: The handle opening of Malco's REDLINE gripped tools maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for your hand.

    Ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and feel for the way you work. Easy one-hand-operation, including an easy open and close latch motion, always leaves a free hand to steady work piece.
     
    1.4 pounds, Jaw depth: 1-1/4 inches (31.8 mm); Jaw Width: 3-1/4 inches (83 mm)
     
    • $49.00

    Not rated yet
  • Malco S3R Three Inch Offset Seamer
    • Free
    Drag and drop me to the cart

    Malco S3R 3 Inch Offset Seamer and Sheet Metal Tongs. Hand Seamers with Forged Steel Jaws - Malco Redline: The handle opening of Malco's REDLINE gripped tools maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for your hand.

    Ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and feel for the way you work. Easy one-hand-operation, including an easy open and close latch motion, always leaves a free hand to steady work piece.
     
    1.45 pounds, Jaw depth: 1-1/4 inches (31.8 mm); Jaw Width: 3-1/4 inches (83 mm)
    • $56.00

    Not rated yet
  • Drag and drop me to the cart

    Malco S6R 6 Inch Hand Seamer and Sheet Metal Tongs. Hand Seamers with Forged Steel Jaws - Malco Redline: The handle opening of Malco's REDLINE gripped tools maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for your hand.

    Ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and feel for the way you work. Easy one-hand-operation, including an easy open and close latch motion, always leaves a free hand to steady work piece.
     
    1.85 pounds, Jaw depth: 1-1/4 inches (31.8 mm); Jaw Width: 6 inches (152 mm)
    • $69.00

    Not rated yet
  • Amerimax Hand Tongs with Extra Blades
    • Free
    Drag and drop me to the cart

    AMERIMAX HAND TONGS - aluminum hand tong seamers with all three blade sizes:  3.5 inch, 7 inch AND 10 inch blades. Save money when you buy the tongs and the extra blades at the same time! Aluminum hand tong seamers with all three blade sizes: 3.5 inch, 7 inch and 10 inch.

    • $35.00

    Not rated yet
  • Fairmont Straight Hand Tongs
    • Free
    Drag and drop me to the cart

    Fairmont MT14000 Straight Hand Tongs and Seamers

    If you do any flashing work, you need at least one set of heavy-duty hand tongs. Made in the USA. Fairmont tongs are preferred by professionals. Select Standard Grip or Cushion Grip Below.

    Three inch wide jaw will bend sheet metal 1 1/8 inches deep. Tool is 9.5 inches long overall and weighs 1.82 pounds.

    Fairmont tongs are forged and plated and fully guaranteed against defective material and workmanship. Used to fold seams on flat seam work, to bend metal into mortar joints when reflashing chimneys, and for general sheet metal or copper work.
     
    Made in the USA by Klenk Tools.


    • $35.00

    Not rated yet
Items: 112 of 14, per page