SHEET METAL CUTTING
Made in the USA.
The Tool Frame dimensions are 19 X 10 inches and weighs 6.7 pounds.
For use with aluminum gutters. For cutting round holes in copper, steel, or aluminum gutters use the Malco Gutter Outlet Saw.
All Malco Gutter Outlet Punch and Dies make clean, accurate hole cuts in .032 inch (0.81 mm) aluminum gutter. Ample throat clearance allows these lightweight outlet punches to work over the front edge of gutter to quickly line up cuts. Fastener holes are provided in the tool frame base for optional bench mount application. An easy ratcheting mechanism and angled punch-blade provide smooth cutting action. High carbon steel blades on punches assure long service life and are also easily replaceable. Heat treated components and weather resistant finishes provide added tool strength and durability.
Select Below: To choose tool frame, replacement chocks, or upgrade kits (details below).
Made in the USA.
For use with a minimum 1/2-in (13 mm) cordless or corded electric drill and Malco combination Arbor and High Speed Pilot Drill. DRILL NOT INCLUDED
For rectangular holes in aluminum gutters use the Malco Gutter Outlet Punch.
Malco Gutter Outlet Saws make safe, fast, clean cuts in thin walled and half round gutter. Downspout fits snug and flush with gutter every time. High speed steel teeth set at 10 per-inch (per 25.4 mm) will not grab or twist material, even when cutting half round gutter.
Select Pilot Drill and/or Saw Diameter below (details below).
Best aviation snips on the market. Designed for professional use. 10 1/2 inches long, right, left or straight cut. This is a hard to find tool!
Malco TS1 20 Gauge TurboShear Drill Attachment. For 20 gauge steel. Made in the USA. This rugged but inexpensive accessory cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20-gauge (1.02 mm) galvanized steel. Blind cuts require only a 1/2 inch (12.7 mm) starting hole. The time-saving TURBOSHEAR Model No. TS1 inserts directly into the chuck of a standard 1200 rpm A/C or cordless drill.
Malco TSA2 16 Gauge TurboShear Drill Attachment. Step up to heavy-duty metal-cutting performance with a 16-gauge (1.52 mm) capacity TurboShear from Malco Products. The Model TSA2 TurboShear Drill Attachment makes a power drill a powerful metal-cutting shear, instantly! Cutting applications in construction mild grade steel.
Malco TSCM 24 Gauge TurboShear Drill Attachment for Corrugated Metal. The rugged but inexpensive TSCM TurboShear fits a drill you already own to make easy cross cuts, fast lengthwise cuts and precise circular and square outlet cuts in large or small pattern corrugated metal roofing and common trapezoidal (box) pattern metal roofing panels.
Malco TSHD 18 Gauge TurboShear Drill Attachment. The rugged but inexpensive TurboShear HD cuts straight and to the left and makes fast cuts in material thickness up to 18-gauge galvanized steel.
Malco TSHD1A 18 Gauge Pneumatic TurboShear .This versatile, compact pneumatic shear cuts straight and to the left and is capable of navigating profiles, tight patterns or square corners on 18 gauge steel. Compatible with standard on-the-job or in-the-shop air supply set-ups. Long wearing blades are easily replaced on the job.
Malco TSMD 18 Gauge TurboShear Double Cut Drill Attachment. This versatile model of Malco's TSMD TurboShear Drill Attachment fits a corded or cordless drill. It is a double-cut metal shear. It's telescoping clamp accommodates both length and width of any size motor housing to ensure easy one-hand operation.
Malco TSMDA 18 Gauge Pneumatic TurboShear.18 Gauge sheet metal capacity. Now you can get double-cut performance in a versatile Malco TurboShear. The 2600RPM (2600 TR/Min) model TSMDA TurboShear Air Tool is compatible with your existing air supply and offers maximum power and speed in a double-cut style shear. Made in the USA.
Scribe commonplace trim lines on sheet metal quickly and accurately. Ten pre-set scribing depths from 1/8 inch to 1 inch (3 millimeters to 25 millimeters).